سنسور NCB40-FP-A2-P1
سنسور القایی مربع شکل مدل NCB40-FP-A2-P1 مارک PEPPERL+FUCHS جهت تشخیص فلزات در فاصله 40 میلیمتری و با قابلیت خروجی باز و بسته به کار میرود.
مشخصات
- شرکت سازنده :
- PEPPERL+FUCHS
- مدل :
- NCB40-FP-A2-P1
- ولتاژ ورودی :
- 24 ولت
- کشور سازنده :
- آلمان
- خروجی :
- PNP NO-NC
- فاصله اندازه گیری :
- 40 میلیمتر
- نوع اتصال :
- ترمینال پیچی
- ولتاژ تغذیه :
- 10-60 ولت DC
- نوع سیم بندی :
- چهار سیم DC
قیمت محصول
- قیت همکار / عمده فروشی :
- استعلام قیمت
- حداقل مقدار سفارش :
- 1 عدد
فایلهای پیوست
| 187486_eng | 243٫46 کیلوبایت | دانلود |
توضیحات محصول
PEPPERL FUCHS INDUCTIVE SENSOR NCB40-FP-A2-P1
| General specifications | ||
|---|---|---|
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 40 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 32.4 mm | |
| Reduction factor rAl | 0.25 | |
| Reduction factor rCu | 0.23 | |
| Reduction factor r304 | 0.85 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 60 V | |
| Switching frequency | 0 ... 80 Hz | |
| Hysteresis | typ. 3 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA | |
| No-load supply current | ≤ 20 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 630 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP68 |
